Pay attention to the installation of the film blowing machine

Pay attention to the installation of the film blowing machine



When the film blowing machine is installed, attention should be paid to adjusting the center line of the extruder head and the center of the traction roller to maintain the vertical level, and not to deviate from the skew. Please pay attention to the combination of the traction speed and the winding speed, please adjust it in time. After the main engine is opened, the operation of the main engine is closely watched. It is timely adjusted, corrected, electrical instrument and controller to ensure its normal operation. Main gear box, traction gear box should always come on, the replacement of gear oil, the new machine use the 10 days to replace the new gear oil, to ensure the normal operation of the rotating parts, filling the attention, prevent jammed and overheat damage, should also check the connecting parts of the fastening, prevent the bolt loosening. The compressed air in the tube should be kept right, because the compressed air leak will be brought out during the traction process. Please supplement it in time.



How many people do the blowing machine operate in general? The PE film blowing machine manufacturer tells you. First of all, no matter how much equipment, each class must have more than 2 people on duty, which is related to the safety of the production of the major events, do not careless. Blowing 1200mm below the thin film can keep 2 people in each class under 3 machines. (the principle is to configure the mixing machine, preferably with the feeder). If there are 6 machines, each class can configure 3-4 people, should be able to meet the needs, the specific look at the row.