Understanding the use of ABA film blowing machine

ABA film blowing machine for blowing: high and low pressure polyethylene film (LDPE, HDPE), the products are widely used in composite film, packing bag, agricultural covering film, textiles, clothing, bags and other packaging, the main motor adopts frequency control, increase the stability of the host, and can save electricity by lifting the traction frame, can make the film cooling to achieve the best results.



In order to get the plastic bag product with controllable quality in the process of processing, the processing links should be controlled in place. In general, the processing process of the film blowing machine is divided into heating, pulling and controlling the edge of the air pressure. After adding gas to the membrane head and adding gas to the middle of the circular membrane, the film is straight up. The size of the plastic bag is controlled by how much air is blown, then the film is stabilized by the film stabilizing device. In order to get the plastic bag product with controllable quality in the process of processing, the processing links should be controlled in place. In general, the processing process of the film blowing machine is divided into heating, pulling and controlling the edge of the air pressure.



Film blowing machine traction device using spray plate bracket, new frequencydecelerate motor, cold pressing point, new adjustable inserting edge device, automatic air supply, LED photoelectric indicating device. The film features: the film is uniform, neatly pressed on the plug side, beautiful, beautiful, neat and thick film, the.



In the film blowing machine feeding section entrance, to a lower temperature, prevent the resin viscous flow inlet is blocked, in addition, continuous feeding in the compressed air to pour Duan Shuzhi, discharged from the feed port. According to the different structure of the blown film machine, the price of the high quality film blowing machine, although the feeding port does not carry out the electric heating and the operation steps of the blown film machine, but through the barrel heat transfer, the temperature of the feeding port is about 50-90 degrees.