ABA blown film machine shutdown work you know?
ABA blown film machineShutdown job has a lot of people don't pay attention to, this affects the life of the blown film machine, blown film authority machine process:
1, should be the firstCorona processorThe power switch off.
2, put the die head, heater switch on the fuselage.
3, the extrusion machine's speed, make the extrusion machine and die slowly cooling.
4, for the temperature control table after the temperature has dropped below 135 ℃, then stop the extruder, turn off the traction and winding switch up and down.Cut off the power switch, shut off the compressed air switch.
5, unload the pick up the film on the scroll, weighing, packaging and warehousing.
6, clean up the leftover material from the extruder, the ground, equipment sanitation clean.
Dalian ABA remind you blown film machine, normal shutdown can prolong the life of blown film machine, can not be ignored!